In the process of realizing automatic production, Dalian automatic processing can correspond to the feeding and blanking operations of one or more machine tools according to the processing process requirements. In the one to many loading and unloading system of NC machine tool robot, the industrial robot completes the taking and placing of blanks and machined parts in different machine tool processing work, which effectively improves the service efficiency of NC machine tool robot.

Short acceleration and deceleration time. When conveying heavy workpieces, the inertia is large. Therefore, the servo drive motor should have sufficient driving and braking capacity, and the supporting elements should also have sufficient stiffness and strength. Only in this way can the servo motor meet the requirements of high response, high stiffness and high precision of truss manipulator transportation. Robots can work continuously in harsh environments.

24-hour operation, fully liberate the factory capacity, shorten the delivery time and improve the market competitiveness. The condition to be satisfied by a physical quantity is equivalent to the stagnation point often said in mathematics. Therefore, using the critical state to solve the maximum and minimum of physical quantity has become an important method to solve the value in physics. Some people think that we should be careful to use the critical state to solve the value. First, we must distinguish the relationship between the two states.

After the on-site inspection arrives at the site, first verify the accuracy and integrity of various conditions provided by the operator, so as to verify the accuracy of preliminary judgment. Due to the level of the operator, there are many examples of unclear or even completely inaccurate description of fault conditions. Therefore, after arriving at the site, do not rush to deal with it, and re investigate various conditions carefully, so as not to damage the site and increase the difficulty of troubleshooting.

Determine the cause, check a variety of possible causes, and find out the real cause of the fault. At this time, it is a comprehensive test for the maintenance personnel on the familiarity, knowledge level, practical experience and analysis and judgment ability of the machine tool. Whether part of the working state is in normal state (such as coordinate axis position, spindle state, tool magazine, manipulator position, etc.), whether each electric control device (such as numerical control system, temperature control device, lubrication device, etc.) has alarm indication, check whether there is safety burning locally, components are burnt, cracked, wires and cables fall off, whether the position of each operating element is correct, etc.